Mini-chargeuse ML150
- Prêt à relever tous les défis
- Une capacité de levage maximale et une hydraulique améliorée
- Conçu pour améliorer le confort de l'opérateur et faciliter l’entretien
General
| Fabricant | Vermeer |
| Modèle | Mini-chargeuse ML150 |
| Catégorie | Aménagement paysager, Énergie renouvelable, Entretien des arbres, Installation de réseaux souterrains, Paysage |
| Prix | Request a Quote |
| Année | 2024 |
General Dimensions and Weights
| Length | 92.5in (235cm) |
| Width | 42in (106.7cm) |
| Height | 59in (149.9cm) |
| Hinge Pin Height | 88in (223.5cm) |
| Ground Clearance | 7in (17.8cm) |
| Weight | 4000lbs (1814.4kg) |
Engine
| Make | Rehlko |
| Model | 1903 KDI-TCR |
| Gross Horsepower | 40hp (29.8kw) |
| Fuel Type | Diesel |
| Fuel Tank Capacity | 13gal (49.2L) |
| Max Torque | 125.4 ft-lb (170 Nm) at 1,500 rpm |
| Cooling System | Liquid |
| Maximum Angle of Inclination | 30deg |
| High Idle | 2600rpm |
Track Performance
| Rated Operating Capacity (SAE) | 1530lbs (694kg) |
| Ground Pressure | 4.8psi (33.1kPa) |
| Max Travel Speed | 4.4mph (7.1km/h) |
| Max Travel Speed (Forward) | 4.4mph (7.1km/h) |
| Max Travel Speed (Reverse) | 3.1mph (5km/h) |
Operational
| Steering | Single pilot-operated joystick |
| Lift/Curl | Single pilot-operated joystick |
| Transmission | Tandem direct-drive pumps |
Hydraulic System
| High Pump Flow | 7.4gpm (28L/min) |
| Auxiliary High Flow | 16.8gpm (63.6L/min) |
| Auxiliary Low Flow | 9.4gpm (35.6L/min) |
| Hydraulic System Pressure | 3045psi (209.9bar) |
| Tank capacity | 12gal (45.4L) |